I-Fujitsu Yangempela FTP-627MCL401 Indlela Yephrinta Eshisayo
I-FTP-627 MCL Series amaphrinta anesivinini esikhulu ashayelwa ngu-24V ane-ultra low profle auto cutter enempilo ende.
I-FTP-627 MCL Series ingasetshenziselwa izinhlelo zokusebenza ezihlukahlukene, ezifana namatheminali e-POS, imishini yokuthengisa amathikithi, amaphrinta amalebula, amatheminali asebhange, nokulinganisa kanye nemishini yezokwelapha.
• Iphrofayili ephansi kakhulu
Ubude 21.8 mm, ububanzi 81.2 mm, ukujula 42.2 mm
• Ukuphrinta kwesivinini esikhulu
Ingakwazi ukuphrinta ku-100/150/200mm/s (800/1200/1600 dotlines/s) ubukhulu ngokusebenzisa isilawuli sekhanda se-Fujitsu esiyingqayizivele.
• Umsiki we-Auto
Impilo ende nesisiki esizenzakalelayo sesitayela se-guilotine (ukusika okugcwele/ingxenye) esinemoto ezinikele.
• Iphepha elilula
Ukukhishwa kwethu kwe-lever platen kuvumela ukufaka iphepha kalula.
• Indlela yephepha egobile
• Iswishi yokubona ngocwecwe
• Uhlaka lwama-die-cast amaningi
Uhlaka olumangelengele lwe-die-cast lunikeza ukusebenza okuhle kakhulu kwe-ESD, alukwazi ukushaqeka/ukudlidliza kanye nesinki sokushisa sivumela ukuphrinta okuqhubekayo.
• Ihambisana ne-RoHS
• Amarejista emali
• Amatheminali e-EFT POS
• Amaphampu egesi
• Amatheminali amabhange
• Izinsimbi zokulinganisa nama-analyzer
• Impahla yezokwelapha
| Into | I-FTP-627MCL401 | ||
| Isibonisi | Ihambisana ne-RS232C/Centronics/USB | ||
| Ukunikezwa kwamandla kagesi | Okwekhanda lokuphrinta | I-MCL401 MCL411 | 24 VDC isilinganiso samanje, 0.5A (0.9 A inani eliphakeme) (isilinganiso sokuphrinta: 12.5%, isivinini sokuphrinta 100mm/sec.) |
| I-MCL601 | 24 VDC isilinganiso samanje 1.0 A (1.9 A inani eliphakeme) | ||
| Okwemoto | I-MCL401/411 | 24 VDC ±5%, 1 A esiphezulu | |
| I-MCL601 | 24 VDC ±5%, 1.1 A esiphezulu | ||
| Okomsiki | I-MCL401 | 24 VDC ±5%, 1 A esiphezulu | |
| I-MCL411/601 | 24 VDC ±5%, 1.3 A esiphezulu | ||
| Okwengqondo | I-MCL401/601 | 3.3 kuya ku-5.25 VDC, 0.1 A ubuningi | |
| I-MCL411 | 2.7 kuya ku-5.25 VDC, 0.1 A esiphezulu | ||
| Ubukhulu | I-Mechanism ene-cutter | 82.5 x 42.2 x 21.8 mm (WxDxH) | |
| Ibhodi le-interface | I-DSL291 | 70x60x12mm(WkDxH) | |
| I-DSL4xx | 96 x 52 x 21.2mm (WxDxH) | ||
| I-DSL6xx | 95x70x21.6 mm (WxDxH) | ||
| Isisindo | I-Mechanism ene-cutter | Cishe 97-107g | |
| Ibhodi le-interface | Cishe 50g | ||
| Inombolo yengxenye | I-FTP-627MCL401/411/601 | ||
| Indlela yokuphrinta | Indlela yechashazi lomugqa oshisayo | ||
| Isakhiwo samachashazi | 432 amachashazi/umugqa | ||
| I-Dot pitch (evundlile) | 0.125 mm (8dots/mm) – ukuminyana kwamachashazi | ||
| Ukuphakama kwechashazi (okuqondile) | 0.125 mm (8dots/mm) – iphimbo lokuphakelayo komugqa | ||
| Indawo yokuphrinta ephumelelayo | 54 mm | ||
| Inombolo yamakholomu | ANK 36 amakholomu/umugqa (ubukhulu. 12/24 ifonti yamachashazi) | ||
| Ububanzi bephepha | 58 mm | ||
| Ukujiya kwephepha | 60 kuya ku-85pm (amanye amaphepha akulolu hlu ma angasetshenziswa ngenxa yezimpawu zephepha) | ||
| Isivinini sokuphrinta | I-MCL401 | Ubukhulu 100mm/sec. (800dot line/sec.) | |
| I-MCL411 | Ubukhulu 200mm/sec. (1,600dot line/sec.) | ||
| I-MCL601 | Ubukhulu 150mm/sec. (1,200dot line/sec.) | ||
| Izinhlobo zezinhlamvu | I-Alphanumeric, noma: Izinhlobo ezingu-159 Izinhlamvu zamazwe ngamazwe: 195 uhlobo lwe-JIS Kanji (Ibhodi elilayishiwe le-Kanji CG): cishe izinhlobo ezingu-6800 | ||
| Uhlamvu, ubukhulu, (WxH), inani lamakholomu | 12 x 24 amachashazi, (1.5 x 3.0 mm), 36 amakholomu: ANK 24 x 24 amachashazi, (3.0 x 3.0 mm), 18 amakholomu: ANK 8×16 amachashazi, (1.0 x 2.0 mm), 54 amakholomu: ANK 16 x 16 amachashazi, (2.0 x 2.0 mm), amakholomu angu-27: ANK | ||
| Impilo | Ikhanda | I-MCL401 | Ukumelana ne-Pulse: 50 million pulses/dot (isilinganiso sokuphrinta: 25%). |
| I-MCL411 | Ukumelana ne-Pulse: 150 million pulses/dot (isilinganiso sokuphrinta:25%). | ||
| I-MCL601 | Ukumelana ne-Pulse: 100 million pulses/dot (isilinganiso sokuphrinta: 25%). | ||
| I-MCL401 | Ukumelana ne-abrasion: ibanga lokuhamba ngephepha 50km | ||
| I-MCL411 | Ukumelana ne-abrasion: ukuhamba ngephepha ibanga elingu-150km | ||
| I-MCL601 | Ukumelana ne-abrasion: ukuhamba ngephepha ibanga elingu-100km | ||
| Umsiki | I-MCL401 | 500,000 ukusikeka | |
| I-MCL411 | 500,000 ukusikeka | ||
| I-MCL601 | 1,000,000 ukusikeka | ||
| Ipuleti | 5,000 izikhathi (vula/vala) | ||
| Indawo yokusebenza | Izinga lokushisa elisebenzayo* | 0°C kuya +50°C | |
| Umswakama osebenzayo | 20 kuya ku-85% RH (akukho ukufingqa) | ||
| Izinga lokushisa lesitoreji | -20°C kuya +60°C (iphepha alifakiwe) | ||
| Umswakama wesitoreji | 5 kuya ku-95% RH (akukho ukufingqa) | ||
| Umsebenzi wokuthola | Ukutholwa kwezinga lokushisa kwekhanda | Kutholwe i-thermistor | |
| Ukutholwa kwephepha/ukumaka | Kutholwe isiphazamisi sesithombe | ||
| Ukukhishwa kwepuleti | Kutholwe ngokuslayida iswishi | ||
| Iphepha elinconywayo elizwelayo lokushisa | I-TF50KS-E4 (Nippon paper) | ||
| I-TF60KS-E (Iphepha le-Nippon), FTP-020PU001 (58mm), PD150R (Iphepha le-Oji), FTP-020PU701 (58mm) | |||
| TF60KS-F1 (Nippon paper), FTP-020P0102 (58mm), PD170R (Oji paper), P220VBB-1 (Mitsubishi paper) | |||
| PD160R (Oji paper), AFP-235 (Mitsubishi paper), TP50KJ-R (Nippon paper), HA220AA (Nippon paper) | |||